Dual-Mode Aptx FSC-Bt1026D A2dp, Avrcp, Hfp, Hsp, Hogp, Pbap, Spp, Gatt Tws Receiver Qcc3034 Qualcomm Audio Bluetooth Module

• Customization: Available
• Usage: Speakers,Headsets,Headphones
• Type: Wireless
• Model NO.: FSC-BT1026D
• Support Network: Bluetooth
• Information content: Audio+Data
• Certification: CE, FCC,IC,Kc,Telec,Ncc,BQB
• Condition: New
• Bluetooth Standard: Dual-Mode Bluetooth 5.1
• Transmit Output Power: +9 dBm (Max.)
• Frequency Band: 2.402~2.480GHz
• Profiles: A2dp, Avrcp, Hfp, Hsp, Hogp, Pbap, Spp, Gatt
• Audio Codecs: Aptx, Aptx HD, Aptx Low Latency, Sbc, AAC
• Fw Upgrade: Uart,USB,Ota,Spi
• Dimensions (mm): 13(W)*26.9(L)*2.2(H)
• Operating Temperature: (-40) to (+85)
• Storage Temperature: (-40) to (+85)
• Certifications: CE, FCC, IC, Kc, Telec, BQB, Ncc, Srrc
• Transport Package: Carton
• Specification: 13*26.9*2.2(mm)
• Trademark: Feasycom
• Origin: Shenzhen, China
• HS Code: 8517799000
• Production Capacity: 500, 000 PCS/ Month

Product Description

Product Description

FSC-BT1026D is a dual-mode Bluetooth 5.1 aptX audio module based on the Qualcomm QCC3034 chipset. It supports A2DP, AVRCP, HFP,HSP, SPP,
GATT, HOGP, and PBAP profiles. Designed for high-end audio applications, it supports aptX, aptX HD, aptX Low Latency,SBC, and AAC audio codecs.
FSC-BT1026D supports communicating with the FeasyBlue app and many other Bluetooth apps.

FeaturesQualified to Bluetooth® v5.1 specification
120 MHz Qualcomm® Kalimba™ audio DSP
32 MHz Developer Processor for applications
Firmware Processor for system
Advanced audio algorithms
High-performance 24-bit stereo audio interface
Digital and analog microphone interfaces
I²S/PCM,SPDIF(only FSC-BT1026ABEF) interfaces input/output
aptX, aptX HD,aptX Adaptive(FSC-BT1026E/F)
aptX, aptX HD, aptX Low Latency (FSC-BT1026B, FSC-1026D)
SBC and AAC audio codecs support
Serial interfaces: UART, Bit Serializer (I²C/SPI),USB 2.0
Integrated PMU: Dual SMPS for system/digital circuits, Integrated Li-ion battery charger

Application subsystem
Dual core application subsystem 32 MHz operation
32-bit Firmware Processor:
    -Reserved for system use
    -Runs Bluetooth upper stack, profiles, house-keeping code
32-bit Developer Processor:
    -Runs developer applications
Both cores execute code from external flash memory using QSPI clocked at 32MHz
On-chip caches per core allow for optimized performance and power consumption
 

Bluetooth subsystem
Qualified to Bluetooth v5.1 specification including
2 Mbps Bluetooth low energy(Production parts)
Single ended antenna connection with on-chip balun and Tx/Rx switch
Bluetooth, Bluetooth low energy, and mixed topologies supported
Class 1 support

Applications
Bluetooth speakers
Bluetooth music box
Wired/wireless stereo headsets/headphones
USB audio

Product Parameters

Categories	Features	Implementation
Wireless Specification	Chip	QCC3021 (FSC-BT1026A) QCC3031 (FSC-BT1026B) QCC3024 (FSC-BT1026C) QCC3034 (FSC-BT1026D) QCC5125 (FSC-BT1026E) QCC5124 (FSC-BT1026F)
	Bluetooth Version	V5.1 Dual-mode
	Frequency	2.402 - 2.480 GHz
	Transmit Power	+9 dBm (Maximum)
	Receive Sensitivity	-96.0 dBm (typ.) π/4 DQPSK receiver sensitivity -89.0 dBm (typ.) 8DPSK receiver sensitivity -100 dBm (typ.) BLE 1 Ms/s receiver sensitivity
		Real-time digitised RSSI available to application
	Raw Data Rates (Air)	3 Mbps (Classic BT - BR/EDR)
Host Interface and Peripherals	UART Interface	TX, RX, CTS, RTS
		General Purpose I/O
		Default 115200,N,8,1
		Baudrate support from 1200 to 4000000
	GPIO	20 (maximum - configurable) lines
		O/P drive strength (2, 4, 8, or 12 mA)
		Pull-up resistor (33 KΩ) control
	I²C Interface	1 I²C Master interface with speed up to 400 kbps
	SPI Interface	SPI debug and programming interface with read access disable locking
	ADC Interface	Analog input voltage range: 0~ 1.854V
		10-bit ADC
		1 channels (configured from GPIO total)
	USB Interface	1 full-speed (12Mbps)
	Audio CODEC	aptX, aptX HD, aptX Low Latency, SBC and AAC audio codecs
		Configurable Signal Detection to trigger events
		1 bank of up to 10-stage Speaker Parametric EQ
		6 banks of up to 5-stage User Parametric EQ for music enhancement
		Compander to compress or expand the dynamic range of the audio
		Post Mastering to improve DAC fidelity
		I²S/PCM outputs with crossover
		USB audio
		Stereo audio ADC with line input, stereo audio DAC
		Supported sample rates of 8, 16, 32, 44.1, 48 and 96 kHz,192kHz(Input)
		MIC SNR: 92 dB
		MIC THD+N: 0.004%
		Audio Output SNR: 98.3dBA typ
		Audio Output THD+N: -87.5dB typ
		Audio Output Power: 1000mV (max) (0dBFS 10K load)
		Stereo separation (crosstalk): -80dB(Min)
Profiles	BR/EDR	SPP (Serial Port Profile) - Up to 600 Kbps
		A2DP/AVRCP/HFP/HSP/HOGP/PBAP/SPP Profiles support
	Bluetooth Low Energy	GATT Client & Peripheral
		Simultaneous BR/EDR and BLE support
Maximum Connections	BR/EDR	up to 7 active slaves
	Bluetooth Low Energy	1 connection as peripheral , up to 5 connections as central
FW upgrade		UART,USB,OTA,SPI
Supply Voltage		VDD_IO: 1.7 ~ 3.3V VBAT_IN: 2.8V~ 4.3V
Power Consumption(BAT_IN=3.3V)		Play:10mA(typ)
		Pairing:5mA(typ)
		OFF:1uA(typ)
Physical	Dimensions	13mm(W) X 26.9mm(L) X 2.2mm(H); Pad Pitch 1mm
Environmental	Operating	-40°C to +85°C
	Storage	-40°C to +85°C
Miscellaneous	Lead Free	Lead-free and RoHS compliant
	Warranty	One Year
Humidity		10% ~ 90% non-condensing
MSL grade		MSL 3
ESD grade		Human Body Model: Class 2 2kV (all pins)
		Charged Device Model: Class III 500 V (all pins)

Certifications

Company Profile

Feasycom focus on the researching and developing of IoT (internet of things) products, including Bluetooth Modules, WiFi and LoRa Modules, Bluetooth
Beacon, etc. With more than 10-year experiences in the wireless connectivity, which ensure us have the capability for providing low-risk product development,
reducing system integration cost and shortening product customization cycle to thousands of diverse customer worldwide.

SDK
APP Support
PCB Design
Development Board
Firmware Development
Depth Customization
Certification Request
Turn-Key Production Testing & Manufacturing

Our products and services mainly apply to Automotive, Point of Sale, Home Automation, Healthcare and Engineering, Banking, Computing, Vending
Business, Location, Lighting and more.

Aiming at "Make Communication Easy and Free", Feasycom is dedicated to design and develop high-quality products, efficient services to customers,
for today, and all days to come

Exhibition

FAQ

Q1.Are you a manufacturer or a trading company?
A1:We are a manufacturer.

Q2.Can you do ODM or OEM for us?
A2:We are glad to offer custom service for you, we have an experienced engineers team who will provide you with a complete solution according to your requirements.

Q3.What payment mothods do you accept?
A3:Paypal,TT,WU,Bank Transfering,Credit Card,Trade Assurance Payment,etc.

Q4.Lead time for sample ordersmass production orders?
A4:Samples,within 3 working days; Mass production,within 15 working days usually.

Q5.What shipping methods do you use?
A5:For samples,DHLUPSFEDEXTNT,etc; For bulk orders,Air shipping and others.